Over time, particulate deposits or minor physical changes within the flow body or internal electronics can lead to deviations from the calibrated flow curve. Recalibration brings instruments back to their optimal calibration specifications.

Each recalibrated device is returned to the customer with a NIST-traceable certificate of calibration that includes parameters and conditions related to the calibration.

Service technicians will evaluate the damage and determine repair needs on a case by case basis.

It typically takes 15 business days after arriving at the factory or service center, however lead time may vary.

We recommend that all devices are returned to an Alicat-approved facility for recalibration. Many devices are recalibrated in our US office, however we also have service centers in China, India, and the Netherlands.

Alicat calibrations evaluate readings at five points within the full scale range of your device: 0%, 25%, 50%, 75%, and 100% of full scale. You can also request a custom calibration, for which you choose the specific calibration points and may use more than 5. These readings are compared with readings taken from one of our in-house flow or pressure standards.

When calibrating controllers, additional valve calibration is required. Service technicians often alter the PID tuning of a device to improve control performance.

Fill out a service request form. Once we receive your request, we will issue you an RMA (Return of Materials Authorization) and send you shipping instructions.