Communication options for Alicat instruments

Every Alicat device is equipped with at least one of the following communication protocols:

  • Analog (4-20 mA, 0-10 Vdc, 0-5 Vdc, or 1-5 Vdc)
  • ASCII over RS-232 or RS-485
  • DeviceNET
  • EtherCAT
  • EtherNet/IP
  • IO-Link
  • Modbus RTU
  • Modbus TCP/IP
  • PROFIBUS
  • PROFINET

In this article, we present an overview of these communication protocols including electrical requirements, device and software compatibility, and network topologies

ASCII and Modbus RTU over RS-232

Alicat devices come default with ASCII and Modbus RTU over RS-232. RS-232 interfaces are useful in systems with short-range, low-speed wired data connection. This is an inexpensive option when you only need to communicate with 26 to 32 devices in low-noise environments.

Modbus RTU has a simple setup and low memory requirement compared to most industrial protocols. It also has broad support among industrial control hardware and software systems. Modbus RTU has a standard set of universal commands, making it easy to use for those who are already familiar with the protocol.

ASCII or Modbus over RS-232 specifications
  • Alicat part number: [default]; -MODBUS on older devices
  • Analog signals: Yes
  • Optional certifications: IP66/67; CSA Class 1/Div 2
  • Electrical connections: Default 8 pin mini-DIN (other options available)
  • Power over protocol connector: Available
  • Dedicated power jack: Yes
  • Additional power requirement: None
  • Device compatibility: All devices**
    • Available with display?: Yes
    • Available via retrofitting to standard device?: Yes
  • Software compatibility: Serial terminals (Alicat Terminal, HyperTerminal, PuTTy); FlowVision 2.0LabVIEW; Modbus poll (Modbus only)
  • Max number of devices on network: 26 (ASCII) or 32* (Modbus)
    • Topologies: Linear; star

*BASIS devices can have 247 Modbus devices on a network.

**CODA not compatible with Alicat’s ASCII.

Resources

Limitations

  • Lower transmission speed compared with RS-485 and Ethernet.
  • Operational across short distances only. Speed falls off considerably with distance.
  • Not usable in high noise environments.

ASCII and Modbus RTU over RS-485

Choose ASCII and Modbus RTU over RS-485 if you are transmitting data across long distances or in a high noise environment. RS-485 can communicate with 26 to 32 devices at once, so larger systems will require an additional industrial protocol (see below).

ASCII over RS-485 is compatible with most devices, excluding CODA and portable options.

ASCII or Modbus RTU over RS-485 specifications
  • Alicat part number: -485; -MODBUS-485 on older devices
  • Analog signals: Yes
  • Optional certifications: IP66/67; CSA Class 1/Div 2
  • Electrical connections: Default 8 pin mini-DIN (other options available)
  • Power over protocol connector: Available
  • Dedicated power jack: Yes
  • Additional power requirement: None
  • Device compatibility: All devices except portables**
    • Available with display?: Yes
    • Available via retrofitting to standard device?: Yes
  • Software compatibility: Serial terminals (Alicat Terminal, HyperTerminal, PuTTy); FlowVision 2.0LabVIEW; Modbus poll (Modbus only)
  • Max number of devices on network: 26 (ASCII) or 32* (Modbus)
    • Topologies: Linear with termination resistor (120 Ohm)

*BASIS devices can have 247 Modbus devices on a network.

**CODA not compatible with Alicat’s ASCII.

Resources

Limitations

  • Connecting to a computer will typically require the purchase of an RS-485 card.

DeviceNET

DeviceNET is a common choice for automation or factory-type settings and can be used to communicate with up to 64 devices. This option has the most limited options for device configurations and is only available with standard devices with no display.

DeviceNET specifications
  • Alicat part number: -DNET
  • Secondary protocol: ASCII over RS-232 (primarily for debugging)
  • Electrical connections: Male 5-pin M12 connector for DeviceNET (top port) and male 9-pin D-sub connector for RS-232 comms (side port)
  • Power over protocol connector: Required
  • Dedicated power jack: No
  • Additional power requirement: 170 mA
  • Device compatibility: Incompatible with CODA, BASIS, EPC, Class 1 Division 2, and portable devices
    • Available with display?: No
    • Available via retrofitting to standard device?: No
  • Max number of devices on network: 64
    • Topologies: Trunk with drop lines

Resources

Limitations

  • Requires a PLC.
  • Incompatible with CODA, BASIS, EPC, Class 1 Division 2, and portable devices.
  • No display.
  • No analog signals.
  • More expensive than ASCII or Modbus.
  • Requires 170 mA power.

EtherCAT

EtherCAT is the fastest industrial Ethernet technology, with data transmission rates up to 100 mbps. It is also capable of communicating with over 65,000 devices on the same network.

EtherCAT specifications
  • Alicat part number: -ECAT
  • Electrical connections: Comms over dual RJ45
  • Power over protocol connector: No
  • Dedicated power jack: Required
  • Additional power requirement: 120 mA
  • Device compatibility: Incompatible with BASIS, EPC, Class 1 Division 2, and portable devices
    • Available with display?: Yes
    • Available via retrofitting to standard device?: No
  • Max number of devices on network: 65,535
    • Topologies: Star; linear

Resources

Limitations

  • Requires a PLC.
  • Incompatible with BASIS, EPC, Class 1 Division 2, and portable devices.
  • No analog signals.
  • More expensive than ASCII or Modbus.
  • Requires 120 mA power.

EtherNet/IP

EtherNet/IP is one of the most popular industrial protocols, and can be thought of as a newer version of DeviceNET that is able to communicate with an unlimited number of devices. Like DeviceNET, it is only available with standard devices but has the added option of a display.

EtherNet/IP specifications
  • Alicat part number: -EIP
  • Electrical connections: Comms over dual RJ45
  • Power over protocol connector: No
  • Dedicated power jack: Required
  • Additional power requirement: 120 mA
  • Device compatibility: Incompatible with BASIS, EPC, Class 1 Division 2, and portable devices
    • Available with display?: Yes
    • Available via retrofitting to standard device?: No
  • Max number of devices on network: No limit
    • Topologies: Star; linear; ring

Resources

Limitations

  • Requires a PLC.
  • Incompatible with BASIS, EPC, Class 1 Division 2, and portable devices.
  • No analog signals.
  • More expensive than ASCII or Modbus.
  • Requires 120 mA power.

 

IO-Link is a bi-directional, digital, point-to-point industrial networking protocol. It allows users to directly interface with multiple devices via higher-level controller. Because of its compatibility with common industrial architectures, such as Fieldbus and industrial Ethernet, it can be easily connected to existing PLCs or HMIs using standard connectors.

IO-Link specifications
  • Alicat part number:  -IOLINKA (Class A) or -IOLINKB (Class B)
  • Electrical connections: M12
  • Power over protocol connector: Yes
  • Dedicated power jack: No
  • Device compatibility:Incompatible with Basis, CODA, Class 1 Div 1, Class 1 Div 2, and portable devices
    • Available with display?: Yes
    • Available via retrofitting to standard device?: No
  • Max number of devices on network: Determined by the IO-Link master

Resources

Limitations

  • Requires an IO-Link master to be used
  • Incompatible with Basis, CODA, Class 1 Div 1, Class 1 Div 2, and portable devices

 

 

Modbus TCP/IP

Modbus TCP/IP is the simplest of ethernet protocols and was created for integration with pre-existing TCP/IP set ups. Use Modbus TCP/IP to communicate with an unlimited number of devices. Like EtherNet/IP, it is only available with standard devices with the option for a display.

Modbus TCP/IP specifications
  • Alicat part number: -MODTCPIP
  • Electrical connections: Comms over dual RJ45
  • Power over protocol connector: No
  • Dedicated power jack: Required
  • Additional power requirement: 120 mA
  • Device compatibility: Incompatible with CODA, BASIS, EPC, Class 1 Division 2, and portable devices
    • Available with display?: Yes
    • Available via retrofitting to standard device?: No
  • Software compatibility: LabVIEW; Modbus Poll
  • Max number of devices on network: No limit
    • Topologies: Star; linear

Resources

Limitations

  • Incompatible with CODA, BASIS, EPC, Class 1 Division 2, and portable devices.
  • No analog signals.
  • More expensive than ASCII or Modbus.
  • Requires 120 mA power.

PROFIBUS DP-V0

Many Alicat devices are available with PROFIBUS for communication with up to 125 devices. PROFIBUS is an open specification communication standard designed for automation equipment.

PROFIBUS specifications
  • Alicat part number: -PROFIBUS
  • Secondary protocol: ASCII over RS-232 (primarily for debugging)
  • Optional certifications: IP66/67
  • Electrical connections: 9-pin D-sub PROFIBUS connector next to a 4-pin M8 connector for RS-232 communication and power
  • Power over protocol connector: Available
  • Dedicated power jack: No
  • Additional power requirement: 120 mA
  • Device compatibility: Incompatible with CODA, BASIS, EPC, Class 1 Division 2, and portable devices
    • Available with display?: Yes
    • Available via retrofitting to standard device?: No
  • Software compatibility: Serial terminals (Alicat Terminal, HyperTerminal, PuTTy); FlowVision 2.0
  • Max number of devices on network: 125
    • Topologies: Linear with termination resistor

Resources

For instruments built after* July 12, 2020:

For instruments built before July 12, 2020:

*Customers with the GSD file for instruments built prior to July 12, 2020 file may continue using it with new units if your system is already configured.

Limitations

  • To communicate with the Alicat, users must have a PROFIBUS card inside of a PC or a PROFIBUS-enabled PLC.
  • Incompatible with CODA, BASIS, EPC, Class 1 Division 2, and portable devices.
  • Not as fast as analog or ASCII serial communication.
  • More expensive than ASCII or Modbus.
  • Requires 120 mA power.
PROFINET specifications
  • Alicat part number: -PROFINET
  • Electrical connections: Dual RJ45
  • Power over protocol connector: No
  • Dedicated power jack: Required
  • Additional power requirement: 75 mA
  • Device compatibility: Incompatible with BASIS, EPC, Class 1 Division 2, and portable devices
    • Available with display?: Yes
    • Available via retrofitting to standard device?: No
  • Max number of devices on network: No limit
    • Topologies: Star; tree; line; ring

Resources

Limitations

  • Requires a PLC.
  • Incompatible with BASIS, EPC, Class 1 Division 2, and portable devices.
  • No analog I/O.
  • More expensive than ASCII or Modbus RTU.
  • Requires 75 mA power.

FastTrack Ordering

M/MC mass flow meters and controllers that ship in just 3-5 business days.
CALIBRATION
Standard or High Accuracy
DISPLAY
Monochrome, Color, or None
PROTOCOL
Analog, RS-232, RS-485, or Modbus RTU
CONNECTOR
MD8, Locking Industrial, DB9M, DB15
FITTINGS
NPT

METER RANGES

2 SCCM - 500SLPM

CONTROLLER RANGES

2 SCCM - 100SLPM

Service and Support

Whether it is time for your instrument’s annual recalibration or your instrument needs a repair or upgrade,
you can fill out the Service Request Form below, email us, call us, or start a live chat session to get the service process started.

7641 N Business Park Dr. Tucson, AZ 85743

Geograaf 24, 6921 EW
Duiven, The Netherlands