Compact Mass Flow Meters, Controllers, and Manifolds
BASIS Meters
Compact flow measurement
- ± 1.5% reading accuracy (gas-dependent)
- ± 0.25% reading repeatability
- 0 – 50°C operating temperature
- 1 minute warm-up
Spec Sheets
BASIS Controllers
Compact flow control
- All the benefits of BASIS Meters
- Integrated proportional control valve
- As fast as 100 ms control response
- Easy automation
Spec Sheets
Compact Manifolds
Save space with multiple devices
Manifold or gassing module
- Built to your process
- Easily connect to PC or PLC
- Wide range of fittings
Build Options
RS-485 Serial
Analog (4-20 mA or 0-5 Vdc)
Modbus RTU (over RS-232 or RS-485)
Downloads
Manuals
BASIS Meters and Controllers Operating ManualLatest – BASIS 2
BASIS Controllers Operating ManualLegacy – BASIS
Brochures
BASIS Brochure
Software/Utilities
FlowVision 2.0
Serial Terminal Utility
Liquid Flow
Liquid flow controllers use either Coriolis or laminar flow technology to accurately control liquid flows across a wide range of applications.
Pressure Instrumentation
Alicat offers pressure controllers for use in flowing, dead-ended, or vacuum applications.
Custom Instrumentation
Order mass flow controllers and meters custom-build to your specific application needs.
Technical Reference
Find guides, tutorials, pinout diagrams, and industrial protocol resources for your Alicat instrument.
Applications
Verify flow and optimize carrier gas control in gas chromatography
Enable full system stability. Fluctuations in flow rate disrupt the detection of chemical compounds. Tightly regulate carrier gas flow rate to ensure accurate compound detection, using a BASIS electronic mass flow controller.
Ensure consistent batches in glass production
BASIS mass flow devices are used in burner control applications to control gases that heat the glass and facilitate drawing. Scripting and electronic control make your process repeatable and precise. Great for production of lab-quality and other high-volume, low-variability glass.
Lowering cost and increasing speed of biologics production
Ensure your process is repeatable and scalable. BASIS provide accurate and responsive gas flow with a large turndown ratio and integrated gas selection. The number of spares required is reduced without sacrificing performance.
Gas mixing in molar ratios
Use BASIS mass flow controller’s intuitive serial commands to make gas mixtures in molecular proportions, and stop paying premiums for custom mixes.
FastTrack Ordering
METER RANGES
2 SCCM - 500SLPM
CONTROLLER RANGES
2 SCCM - 100SLPM
Service and Support
Whether it is time for your instrument’s annual recalibration or your instrument needs a repair or upgrade,
you can fill out the Service Request Form below, email us, call us, or start a live chat session to get the service process started.